ELECTRIC VEHICLES AND CHARGING STATION ( for electric engineers and/or experts in electric vehicles).

*this paper is specifically for electric engineers and/or experts in electric vehicles and charging stations* please read all instructions carefully The paper need to review the literature and figure out the following parameters ( find these parameters for different types of electric vehicles and specify them then you need only to give me a summary which gives an average value for each): -(the minimum EV battery level in percentage) – (the consumption of EV from the battery (per km)) – (the power in kW consumed by A/C during starting operation) – (the power in kW consumed by HT(heat) during starting operation) – (the power in kW consumed by A/C during continuous operation) – (the power in kW consumed by HT during continuous operation) – ( the maximum temperature limit for battery usage in BCD mode) – (the average thresholds for A/C operation) – (temperature for battery usage in BCD mode) – (the minimum temperature limit for battery usage in BCD mode) – (the average thresholds for HT operation) – (the min battery in kwh) – (the max battery in kwh) – rate of fast charging (kwh/min) ( for different fast charger manufacturing companies) – rate of slow charging (kwh/min) ( for different slow charger manufacturing companies) * I don’t need an introductory paragraph you need to just directly start by reviewing the literature for the specified parameters * You need to provide for each parameters for different electric vehicles brands and from different sources * You need to provide at each number behind it the source that you bring this number from or if you have experience and suggest a number then you specify that* All the parameters need to provide me different numbers for it to convince the instructor that this number is available in different literature and specifically write the source that you get it from* Just be on point no need for introductory paragraphs you need to be very specific and provide all the parameters with the unit specified * You need to use different sources and you can use different car and charging stations piles manufacturers as a sources * you need to use credible sources and at least 3 sources that are for this year * YOU NEED TO MAKE SENSE OF THE NUMBERS EVEN IF YOU FIND IT IN A SOURCE IF IT DOESN’T MAKE SENSE FROM ELECTRICAL ENGINEERING POINT OF VIEW DON’T USE THIS SOURCE *NO NEED FOR ANY WRITEN PART YOU CAN SUBMIT FOR EACH PARAMETER (AT LEAST 3 DIFFERENT VALUES FROM 3 DIFFERENT SOURCES) AT ANY FORMAT YOU LIKE *use IEEE format to do referencing * use some 2020 and 2021 sources (not all) *so i need a table at the end has each parameter name as stated above and behind it the numbers that you found and then behind each number i need the reference for it (such as 2 [1] means number 2 and source 1)